Zebra Technologies TTP 7030 - Manual (Page 74)

Default Parameter Settings
Serial Interface Set-Up 74
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Select what handshaking to use on the serial interface.
4
2 Default
Flow-control
1
0 Min
2 Max
<ESC>&P<4><0>
No flow control
<ESC>&P<4><1>
Xon / Xoff *
*. DO NOT USE if you send any type of binary data like graphics data, status requests etc.
Xon / Xoff only works when plain text is sent unidirectional to the printer. Graphics and
status replies may well contain the Xon (11h) and Xoff (13h) characters and will obstruct
the communication.
<ESC>&P<4><2>
Hardware