Zebra Technologies TTP 7030 - Manual (Page 9)

10/05/2009 TTP 7030™ Technical Manual P1003636-002
2
Product Presentation
The TTP 7030 kiosk printer uses direct thermal printing. The print speed is up to 75 mm per
second.
The printer has an integrated control board. The TTP 7030 communicates with the host
computer through the USB interface and can be equipped with an optional serial port.
Figure 1 • Printer Exterior, Rear View
Printer drivers for Microsoft Windows™ are available, and the printer is compatible with the
Plug and Play standard. It is also possible to address the printer directly from the kiosk
software without using drivers.
The loop generating presenter mechanism handles documents of various lengths. It holds the
printout until printed, then cuts and presents the complete printout to the customer. The retract-
and-retain version of the printer can retract uncollected printouts into a wastebasket inside the
kiosk.
A flip-up print module gives the operator access to the paper path, and print head, for
maintenance purposes.
R o ll h o ld e r pa p e r le ve l se n so rs
J1
P a p e r e n try
In d ica to rs fo r 2 4 a n d 5 V
S e ria l a d a p te r (o p tio n )
P o w e r
J8
IE E E -1 2 8 4 C
J1 0
S W 9 8 0 5 1 B
U S B
J1 3