Zebra Technologies TTP 7030 - Manual (Page 79)

79 Default Parameter Settings
Print Setup
10/05/2009 TTP 7030™ Technical Manual P1003636-002
Determines what should control the page length:
Defines three different things:
1.
The minimum length of a page in variable document mode
2.
The actual page length in fixed document mode
3.
The distance between black marks in black mark mode
One step is 0.125 mm. Settings shorter than 75 mm, will be interpreted as 75 mm.
<ESC>&P<37><5><ESC>&P<38><205>
Set page length to A5 (148.5 mm)
36
1 Default
Document Mode DRV 0 Min
2 Max
<ESC>&P<36><0>
Fixed Document Mode. Shorter documents will automatically
be extended, while longer documents will be divided into
several pages of the desired length. Page length will be the
length set by parameters 37 and 38
<ESC>&P<36><1>
Variable Document Mode. The length of the page varies with
the contents (printouts shorter than the value specified by
parameters 37 and 38 will be extended to that length)
<ESC>&P<36><2>
Black Mark Mode. Marks on the paper set the form length.
Minimum one form length is always fed. If a black mark is
found before that, the printer feeds to the next black mark, then
cuts and ejects. This ensures that no small paper stripes are cut
of and left in the printer.
Note • Max page length in Fixed Document Mode is A5-size, which is 148.5 mm.
37 & 38
2 , 88 Default
Page Length DRV 2 , 88 Min
255 , 255 Max