Zebra Technologies TTP 7030 - Manual (Page 73)

73 Default Parameter Settings
Serial Interface Set-Up
10/05/2009 TTP 7030™ Technical Manual P1003636-002
Serial Interface Set-Up
Sets the communication speed on the serial interface.
Selects if 7-bit ASCII, or 8-bit, is used on the serial interface.
Select what parity to use on the serial interface.
1
96 Default
Baud Rate 24 Min
11 Max
Note • The new value is not valid until the parameters are stored and the printer restarted.
<ESC>&P<1><24>
2400 bps
<ESC>&P<1><48>
4800 bps
<ESC>&P<1><96>
9600 bps
<ESC>&P<1><19>
19200 bps
<ESC>&P<1><38>
38400 bps
<ESC>&P<1><57>
57600 bps
<ESC>&P<1><11>
115200 bps
Note •
If you set an invalid value, the baud rate will return to the previous value.
2
8 Default
Data Bits
1
7 Min
8 Max
<ESC>&P<2><7>
7-bits (characters 0-127)
<ESC>&P<2><8>
8-bits (characters 0-255)
3
0 Default
Parity
1
0 Min
2 Max
<ESC>&P<3><0>
No parity
<ESC>&P<3><1>
Odd parity
<ESC>&P<3><2>
Even parity