Zebra Technologies TTP 7030 - Manual (Page 49)

49 Programming
Print Commands
10/05/2009 TTP 7030™ Technical Manual P1003636-002
The value n represents the number of dot lines the paper is to be transported backwards.
Range: 1–255.
A dot line is 0.125 mm, and 255 dot lines equal approximately 32 mm.
ESC j n1
Paper Reverse
1B 6A n1 hex
27 106 n1 decimal
Caution • Paper reverse may cause problems when used at the top of the page. Doing so
may cause paper jam when feeding forward again. The printer may also lose grip of the
paper. NEVER reverse more than 10 mm at top of page!