Zebra Technologies TTP 7030 - Manual (Page 96)

Interface
USB Interface 96
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
USB Interface
The USB (Universal Serial Bus) is an interface designed to handle peripherals daisy chained to
a single connector. The transfer speed is up to 12 Mbits/s, which is quite adequate for the
printer. Use this interface in operating systems with USB support, for instance Windows XP.
USB devices are Plug and Play compatible and hot swappable, which means that they can be
connected and disconnected without turning off the power, or rebooting the computer.
Table 4 • USB Connector (J13) Pin Assignment
Contact
Number
Signal
Name
Comment
1 VCC Cable power
2 – Data
3 + Data
4 Ground Cable ground