Yamaha DME - Manual (Page 107)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 107
■ Control Source Selection via a CP4SW
A CP4SW control panel connected to the GPI terminal can be used to switch the channel source of
Source Selector (Position 4) components.
Assign the Source Selector component's Position parameter via the Parameter Value Edit function in
the GPI IN and GPI OUT fields and set the parameter values ([Max] in the GPI IN field, and [Threshold]
in the GPI OUT field) to 1 through 4 for the corresponding ports. The CP4SW switches will then select
the corresponding channel sources, and the corresponding switch LED will light.
[Terminal] in the GPI IN field cannot be altered. If [Terminal] in the GPI OUT field is set to
, a high
level voltage will be output and the LED will light when the Position parameter matches the [Threshold]
setting.
“GPI” Dialog Box
When you click the [GPI] command on the [Tools] menu, the “GPI” dialog box is displayed. Sets GPI
input/output for the DME.
Names and Functions
GPI IN
[DME]
[Apply]
Button
[Cancel]
Button
[OK]
Button
GPI OUT