Yamaha DME - Manual (Page 128)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 128
Parameter
Sets the parameter assigned to each function key. If you click here, a list will be displayed. This list
displays the parameters that are included in the current configuration. Select the parameter you
want called by the function key.
LCD Display
Sets the text displayed on the DME unit or ICP1. Click the [LCD Display] box and enter text. Up to
23 characters can be entered into the [LCD Display] box.
After you confirm the name by pressing the <Enter> key, a short name will be created and
displayed in the function key area as follows: “F1 [shortnam].” The short name will also be
displayed in the DME unit or ICP1 main display. A short name is automatically created with up to
eight characters for display as the user defined parameter name on the DME unit or ICP1 main
screen
Min, Max
Sets the lower and upper limits for a parameter.
■ [Clear] Button
Clears assignments for the selected function keys. This is the same as “No Assign.”
■ [OK] Button
Accepts the changed settings and closes the dialog box.
■ [Cancel] Button
Closes the dialog box without changing the settings.