Yamaha DME - Manual (Page 383)

Chapter 6 Component Guide
DME Designer Owner’s Manual 383
■ Parametric Equalizer
When you click the [PEQ] button for the crossover processor, it opens the parametric equalizer
editor window. Here you can make parametric equalizer settings for each frequency band.
Name Function
1
PEQ Curve Displays the PEQ curve.
Parameter Setting Range Function
2
Type PEQ
L.SHELF 6 dB/Oct
L.SHELF 12 dB/Oct
H.SHELF 6 dB/Oct
H.SHELF 12 dB/Oct
HPF
LPF Select the filter type from the menu.
3
Q 0.1 to 16.0 Sets the band width of each band.
4 Frequency 20 Hz to 20 kHz Sets the frequency of each band.
5 Gain -18 dB to +18 dB Sets the frequency gain for each band.
6
Bypass ON/OFF Turns ON bypass for each band.
7 PEQ On ON/OFF Turn the PEQ ON.
1
2
3
4
5
6
7