Yamaha DME - Manual (Page 433)

Chapter 6 Component Guide
DME Designer Owner’s Manual 433
Channel Group Switching
The [Matrix Mixer - Crosspoint] editor window displays four channels each for Input and Output.
It displays the channel group that was clicked on in the matrix mixer component editor. The
[Channel] buttons in the [Input] and [Output] sections of the [Matrix Mixer - Crosspoint] editor
window switch the channel group that is displayed.
If you click another channel group when the matrix mixer component editor is active and an [Matrix
Mixer - Crosspoint] editor window is displayed, that channel group will be displayed in the open
[Matrix Mixer - Crosspoint] editor window.
Only one [Matrix Mixer - Crosspoint] matrix window is displayed for each matrix mixer component
editor.
Simple Mixer
This is a simple mixer with AUX and PFL facilities. 16-channel and 24-channel types are provided.
[Input] section
[Channel] menu [Output] section
[Channel] menu
STEREO L STEREO R PFL AUX 1 AUX 2
ON LEVEL
3BAND
EQ
IN1(...24)
PAN
METER
METER
METER
PFL
AUX
ON LEVEL BAL
ST L
Same as stereo master L ST R
AUX 1
AUX 2
PFL
Simple Mixer
LEVEL
PRE/POST