Yamaha DME - Manual (Page 203)

Chapter 4 Designer
DME Designer Owner’s Manual 203
When I/O Cards Are Installed in DME Expansion Slots
When an I/O card is selected for an expansion slot in the DME properties, an I/O port is added for
the DME arranged in the Zone window. An I/O component block will be added to the configuration
window.
If [None] is selected for I/O cards in the DME properties, any I/O component blocks will also be
deleted automatically from the Configuration window. (Even if the I/O components are deleted, the
wiring will remain.)
When the DME64N Cascade Setting is Turned ON
When [Show Cascade Port on Configuration Window] is checked in the DME64N “DME Device
Properties” dialog box, the cascade I/O components will be displayed in the Configuration window.
If [Show Cascade Port on Configuration Window] is turned OFF in the DME64N “DME Device
Properties” dialog box, cascade I/O components will also be deleted automatically in the
Configuration window. (Even if the Cascade I/O components are deleted, the wiring will remain.)
DME64N block with card inserted in a slot and the Configuration window