Yamaha DME - Manual (Page 144)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 144
Component Lock
Click [Component Lock] in the [Tools] menu to display the Component Lock dialog.]
Names and Functions
The component/user module names included in the DME will be displayed. AD and Slot will also be
displayed.
When the checkbox to the left of the component name is checked, the component is locked so that it
is not possible to change parameters from a PM5D or other external device controlling the DME unit
via the RS-422 interface. While the component is locked it is still possible to control the internal DME
head amps via the Internal HA Control function. The lock settings will be transferred to the DME when
the unit is placed on-line. The settings can only be changed while off-line.
■ [Select All] Button
Checks all component checkboxes.
■ [Clear All] Button
Clears all component checkboxes.
■ [OK] Button
Enters the settings and closes the dialog box.
■ [Cancel] Button
Closes the dialog box without entering the settings.
NOTE
Does not apply to SP2060 units
NOTE
If user module security is enabled the components will not be displayed. Components displayed by the User Module Editor
will be displayed.
NOTE
Only users who's [Edit] box is checked can edit the lock status.