L/r selection, Exiting the probe monitor, Monitoring the second or later time – Yamaha DME User Manual
Page 290
Chapter 4 Designer
DME Designer Owner’s Manual
290
The output port you clicked will be selected and monitoring will begin.
If you click another output port, the location being monitored will change.
■ L/R Selection
To monitor the left channel and right channel simultaneously, <Shift> + click on the left channel,
then do the some for the right channel.
■ Exiting the Probe Monitor
Click [Probe Monitor] in the [Tools] menu or the [Probe Monitor] button on the toolbar to turn OFF
the probe monitor. When probe monitor is turned off, the mouse pointer returns to its normal shape.
■ Monitoring the Second or Later Time
The software remembers the location being monitored even when probe monitoring is turned OFF.
The next time probe monitoring is turned ON, the location that was being monitored previously will
be selected.
NOTE
When you go offline probe monitoring is disengaged and the monitor point will not be restored when you go online again.
Monitor object