Yamaha DME - Manual (Page 171)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 171
Clock
When you click the [Clock] command on the [Hardware] menu, the “Clock” dialog box is displayed
after the “Utility” window has been displayed once. Here you can set the DME internal clock. This can
be set only when online. The default is the computer date and time. The daylight saving time can also
be set.
■ [Date/Time]
Sets the date via the left button and the time via the right button. Change the values via the up and
down arrow buttons at the right edge of the box.
■ [Enable Daylight Saving Time]
When this checkbox is checked daylight saving time display is enabled. The [DST] indicator will also
appear in the Date field of the DME64N/24N display.
[Offset]
Sets the time offset for the daylight saving time period.
[Start Time]
Sets the time at which daylight saving time will start.
[End Time]
Sets the time at which daylight saving time will end. If the end time is the same as the start time,
check [Same as Start Time].
NOTE
Does not apply to SP2060 units
NOTE
The date and time display format can be changed via the Windows control panel “Regional and Language Options” item.
This will also change the display format for the “Utility”, “Event Logger”, “Event Scheduler” and other dialog boxes.