Yamaha DME - Manual (Page 334)

Chapter 5 Components
DME Designer Owner’s Manual 334
■ Slider “Level Meter Properties” Dialog Box
The “Level Meter Properties” dialog box will appear when you either double-click a slider level
meter or right-click it and select [Properties] from the contextual menu. This lets you change the
size and orientation of the related level meter.
Size
[Width] and [Height] set the width and height of the level meter in pixel increments.
[Direction]
Set the level meter’s orientation to [Vertical] or [Horizontal] as required.
■ “Indicator Properties” Dialog Box
The “Indicator Properties” dialog box will appear when you either double-click an indicator or right-
click it and select [Properties] from the contextual menu. This lets you change the size and display
characteristics of the related indicator.
Size
[Width] and [Height] set the width and height of the indicator in pixel increments.
[Threshold Logic]
Determines whether the indicator will light or go out when the monitored parameter exceeds the
threshold. Select [Turn On] if you want the indicator to light when the threshold is exceeded, or
[Turn Off] if you want the indicator to go out when the threshold is exceeded.
[Color]
Click the [Select Color] button and select the desired indicator color in the “Select Color” dialog
box.
NOTE
The size of level meters can also be changed by dragging any of the meter’s corners in the user control editor.
NOTE
The size of indicators can also be changed by dragging any of the indicator’s corners in the user control editor.