Yamaha DME - Manual (Page 414)

Chapter 6 Component Guide
DME Designer Owner’s Manual 414
Mixer
The Mixer group contains the Auto Mixer, Auto Mixer II, Delay Matrix, Matrix Mixer, and Simple Mixer.
Auto Mixer
There is a noise gate for each input channel, which passes only signals that exceed a specified
threshold. There are five mixer types, each with a different number of inputs.
Double-click a component to display the component editor for it. The number of channels varies
depending on the component, but all share a common configuration in the component editor. The auto
mixer component editor consists of two sections: input channels and master output.
Section Parameter Setting Range Function
1
Input Channels Phase ON/OFF Reverses the phase of each channel’s
input signal.
2 Gate Indicator -- When the gate is open, the light turns
green. When the gate is closed, the light
turns yellow.
3 Threshold -54 dB to ±0 dB Sets the threshold value for each gate.
4 Hold 44.1 kHz: 110 ms to 2.13 s
48 kHz: 101 ms to 1.96 s
88.2 kHz: 55.1 ms to 1.06 s
96 kHz: 50.6 ms to 981 m Sets the gate hold time.
The setting range may vary, depending
on the operating frequency.
1
3
8
4
5
2
6
7 )
9
!
Auto Mixer component editor