Yamaha DME - Manual (Page 232)

Chapter 4 Designer
DME Designer Owner’s Manual 232
■ User Module Properties
To display the “User Module Properties” dialog box, select a user module object, then click the
[Properties] command on the [Edit] menu.
[Label] Box
You can enter up to 100 English characters to display over the object.
[Width] Box
Specifies the width of the object in pixels.
[Height] Box
Specifies the height of the object in pixels.
[Style]
Sets the style of the object. From the list, select [Plain], [Raised], [Sunken], or [Image]. When
[Image] is selected the Open dialog will appear. Select an image file and click [Open] to place the
selected image as an object.
[Label Font] Button
Sets the font for the label. Clicking here displays the “Select Font” dialog box.
For information about the “Select Font” dialog box, see
page 251 .
[Label Color] Button
This sets the color of the label text. Clicking here displays the “Select Color” dialog box.
[Inputs/Outputs Labels Color] Button
Sets the color for the I/O port label text. Clicking here displays the “Select Color” dialog box.
[Color] Button
Sets the color of the object. Clicking here displays the “Select Color” dialog box.
NOTE
The “User Module Properties” dialog box is also displayed when a [Blank User Module] is arranged in the configuration
window.
NOTE
For information about the “Select Color” dialog box, see page 252 .