Crossover – Yamaha DME User Manual
Page 380
Chapter 6 Component Guide
DME Designer Owner’s Manual
380
■ Crossover
When you click the [Crossover] button for the crossover processor, it opens the crossover editor
window.
7
Navigator
Crossover
--
This opens the crossover editor window.
8
Delay
--
This opens the delay editor window.
9
PEQ
--
This opens the parametric equalizer editor
window.
)
Compressor
--
This opens the compressor editor window.
Name
Function
1
Crossover Curve
Displays the level of each frequency band,
distinguished by color.
Section
Parameter
Setting Range
Function
2
Frequency
20 Hz to 20 kHz
Sets the cross frequency between each
frequency band.
3
Polarity
Normal/Inverted
Reverses the output signal phase for each
frequency band.
4
Mute
ON/OFF
Mutes the signal for each frequency band.
This is linked to the Mute setting in the
original window. The display appears as a
dotted line when muted.
Name
Function
1
2
3
4
5
6
7
9
)
8
Crossover Processor II component editor