SENA LS110 - Manual (Page 12)

12
Figure 2-1 The panel layout of the LS110
2.2 Connecting The Hardware
This section describes how to connect the LS110 to the serial device for the first time.
- Connect the power to the LS110
- Connect the Ethernet cable between the LS110 and Ethernet hub or switch
- Connect the serial data cable between the LS110 and a serial device
2.2.1 Connecting The Power
Connect the power jack to the LS110 power jack using DC power adapter included in the package. If
the power is properly supplied, the [Power] lamp of the LS110 will maintain solid red.