SENA LS110 - Manual (Page 51)

51
6.2 Username
Using ‘Username’ menu, you can change username. The usage is as follows.
-------------------------------------------------------------------------------
System administration
-------------------------------------------------------------------------------
1. Device name : LS110
2. Username : root
3. Password : root
4. Factory reset
5. Factory reset without IP settings
6. Firmware upgrade
7. Ping
8. User connection status
9. Telnet configuration enable/disable : Enable
<ESC> Back, <ENTER> Refresh
---> 2
Enter new username : root
Enter current password : ****
Username changed.
Figure 6-3 Username Screen
6.3 Password
Using ‘Password’ menu, you can change login password. The usage is as follows.
-------------------------------------------------------------------------------
System administration
-------------------------------------------------------------------------------
1. Device name : LS110
2. Username : root
3. Password : root
4. Factory reset
5. Factory reset without IP settings
6. Firmware upgrade
7. Ping
8. User connection status
9. Telnet configuration enable/disable : Enable
<ESC> Back, <ENTER> Refresh
---> 3
Enter new password : ****
Confirm new password : ****
Enter current password : ****
Password changed.
Figure 6-4 Password Screen