Accessing console port – SENA LS110 User Manual
Page 14
14
2.2.3 Connecting To The Device
Connect the serial data cable between the LS110 and the serial device. If necessary, supply power to
the serial device attached to the LS110.
Figure 2-4 Connecting a serial device to the LS110
2.3. Accessing Console Port
There are two ways to access console port of the LS110 depending on whether the user is located at a
local site or a remote site.
- Serial console:
Local users can connect directly to the serial console port of the LS110 using serial console/data
cable (null-modem cable). The serial port of the LS110 is used as the console port as well as the
data port. To use the serial port as the console port, slide Data/Console switch to the Console
side.
- Remote console:
Remote users can make a telnet connection to the remote console port (port 23) of the LS110
via TCP/IP network.
Both methods require the user to log into the LS110 in order to continue.