SENA LS110 User Manual
Page 17
Advertising
17
telnet 192.168.1.254
Or run a telnet program with parameters as follows.
Figure 2-8 Telnet program set up example
2)
The user has to log into the LS110. Type the user name and password. A factory default
setting of the user name and password are both ‘root’.
3)
If the user logged into the LS110 successfully, the same menu screen, as the one depicted in
the serial console will be displayed. At menu selection screen, user can select each menu, by
choosing the appropriate number.
Advertising