SENA LS110 - Manual (Page 25)

25
For each host mode, required parameters for configuration are summarized in Table 4-2.
Table 4-2 Host mode configuration parameters
host_mode parameter name Description
local_port Local Port
dtr_behavior DTR Behavior
dsr_behavior DSR Behavior
inactivity_timeout Inactivity Timeout
allowed_ip IP that enables to connect to LS110
TCP Server
allowed_subnet Subnet that enables to connect to LS110
dest_ip Destination IP Address
dest_port Destination Port
dtr_behavior DTR behavior
dsr_behavior DSR behavior
cyclic_connection Cyclic Connection Time
inactivity_timeout Inactivity Timeout
allowed_ip IP that enables to connect to LS110
TCP Client
allowed_subnet Subnet that enables to connect to LS110
local_port Local Port
dest_ip Destination IP Address
dest_port Destination Port
dtr-behavior DTR Behavior
dsr_behavior DSR Behavior
cyclic_connection Cyclic Connection Time
inactivity_timeout Inactivity Timeout
allowed_ip IP that enables to connect to LS110
TCP
Server/Client
allowed_subnet Subnet that enables to connect to LS110
Local port Local Port
dest_ip Destination IP Address
UDP
Tunneling
dest_port Destination Port
Local port Local Port
UDP Server
inactivity_timeout Inactivity Timeout
Modem
Emulation
None Set required parameter by its modem commands.
local_port Local Port
dtr_behavior DTR Behavior
dsr_behavior DSR Behavior
inactivity_timeout Inactivity Timeout
allowed_ip IP that enables to connect to LS110
Telnet
Server
allowed_subnet Subnet that enables to connect to LS110