SENA LS110 - Manual (Page 50)

50
6: System Administration
Using ‘System administration’ menu, allows the user to manage the LS110.
Figure 6-1 The sub menu of ‘System administration’.
-------------------------------------------------------------------------------
System administration
-------------------------------------------------------------------------------
1. Device name : LS110
2. Username : root
3. Password : root
4. Factory reset
5. Factory reset without IP settings
6. Firmware upgrade
7. Ping
8. User connection status
9. Telnet configuration enable/disable : Enable
<ESC> Back, <ENTER> Refresh
--->
Figure 6-1 System administration
6.1 Device Name
Using ‘Device name’ menu, you can change device name. The usage is as follows.
-------------------------------------------------------------------------------
System administration
-------------------------------------------------------------------------------
1. Device name : LS110
2. Username : root
3. Password : root
4. Factory reset
5. Factory reset without IP settings
6. Firmware upgrade
7. Ping
8. User connection status
9. Telnet configuration enable/disable : Enable
<ESC> Back, <ENTER> Refresh
---> 1
Enter device name (Maximum 30 characters)
--->
Figure 6-2 Device name Screen