SENA LS110 - Manual (Page 31)

31
Established
Closed
Data
Incoming data via
serial port
Inactivity time-out
TCP connection request rejected
Or
internal TCP timer is expired
TCP connection request accepted
Sync-Sent
Incoming data via
serial port
Incoming data
from remote host
Incoming TCP
disconnection request
Cyclic connection
interval time-out
Figure 4-3 State Transition Diagram of TCP client mode
3) Parameters
 Remote IP address (or domain name) and Remote Port
This is the information on the remote host to which the LS110 will try to connect in TCP client
mode. The IP address (or domain name) should be specified together with the TCP port number.
To specify the information on the remote host IP and port, refer to following examples.