SENA LS110 - Manual (Page 7)

7
1: Introduction
1.1 Overview
The LS110 allows you to network-enable a variety of serial devices that were not originally designed to
be networked. This capability brings the advantages of remote management and data accessibility to
thousands of serial devices over the network.
The LS110 is a cost effective one port serial-Ethernet communication device. The LS110 supports
RS232 serial communication allowing virtually any asynchronous serial device to be accessed over a
network.
As for Internet connectivity, the LS110 supports open network protocols such as TCP/IP allowing serial
devices to be accessed over broadband network or conventional LAN (Local Area Network)
environment.
The LS110 provides a management console by using Telnet and serial console port which is all
password protected. The LS110 also provides an additional management function by using the
HelloDevice Manager Software Utility.
The LS110 was designed to accommodate the unique requirements of the Retail POS, Security,
Automation and Medical marketplaces.
Parts of this manual assume that the user has some knowledge on the concepts of the Internetworking
protocols and serial communications. If you are not familiar with these concepts, please refer to the
standards or the respective documentation on each subject.
1.2 Package Check List
- LS110 external box
- 110V or 230V Power supply adapter
- Serial console/data cable
- A hardcopy of Quick Start Guide