Connect input power, Figure 7 esd jack, Figure 8 converter shelf dc connections access – GE Industrial Solutions CPS2400U User Manual
Page 12
Advertising
CPS2400U Upstream System – 19” Product Manual
CPS2400U
850028186 r04 December 2013
12
Connect Input Power
Step
Action
Converter Shelves Connect Power
1.
Connect your personal ESD strap to the ESD jack on the left of a converter shelf before proceeding.
Figure 7 ESD Jack
2.
Verify voltage and polarity of each wire before connecting.
Use a Volt meter.
3.
Remove power from all DC connections to be installed.
Turn off circuit breakers and remove fuses.
Verify with a Volt meter.
4.
Turn OFF circuit breakers assigned to this frame and verify with an volt meter
5.
Open the distribution panel door on the right end of the shelf.
Figure 8 Converter Shelf DC Connections Access
Press Latch to
Release Door
Advertising