Set shelf id, Figure 14 alarm card access, Figure 15 alarm card removal – GE Industrial Solutions CPS2400U User Manual
Page 18
Advertising
CPS2400U Upstream System – 19” Product Manual
CPS2400U
850028186 r04 December 2013
18
Set Shelf ID
Systems Equipped With Controller - Set ID (address) of each shelf to a unique value.
Systems Without Controller –ID (address) not used.
Step
Action
1.
Open the distribution door.
Figure 14 Alarm Card Access
2.
Remove the alarm card.
Figure 15 Alarm Card Removal
Press Latch to
Release Door
Bring door to level position
before removing alarm card
Door must be fully open to
remove alarm card
Advertising