GE Industrial Solutions Entellisys 4.0 Integrator's Guide - Manual (Page 73)

73
3 Options (Read/Write Setting)
6E4D Option High Current Relay Node x State
Enable 0 to 4294967295 --- 1 F722 0
Options (Read Only)
6E4F Option Freq and Rev Pwr Relay Count 0 to 30 --- 1 F001 0
Options (Read/Write Setting)
6E50 Option Freq and Rev Pwr Relay Node x
Enable 0 to 4294967295 --- 1 F722 0
6E52 Reserved (3 items) --- --- --- F001 0
Options (Read Only)
6E55 Option HRGF Location Count 0 to 4 --- 1 F001 0
Options (Read/Write Setting)
6E56 Option HRGF Location Function x State
Enable 0 to 15 --- 1 F722 0
Self Test Targets (Read Only)
6E64 Reserved (4 items) --- --- --- F001 0
Function X HRGF Location Settings (Read/Write Setting) (4 modules)
6E80 Function X HRGF Location Auto Mode
Enabled 0 to 1 --- 1 F102 1 (Enabled)
6E81 Function X HRGF Location Main Breaker 0 to 30 --- 1 F001 30
6E82 Function X HRGF Location ReAlarm Delay 0 to 99 S 1 F001 8
6E83 Function X HRGF Location Alarm ReCheck
Delay 0 to 99 S 1 F001 2
6E84 Function X HRGF Location Trip Delay 0 to 999 S 1 F001 0
6E85 Function X HRGF Location Trip Enabled 0 to 1 --- 1 F102 0 (Disabled)
6E86 Function X HRGF Location Settings Reserved
(5 items) --- --- --- F001 0
6E8B ...Repeated for module number 2
6E96 ...Repeated for module number 3
6EA1 ...Repeated for module number 4
Function X HRGF Location (Read/Write Setting)
6EA8 Function X HRGF Location Manual Mode
Start 0 to 1 --- 1 F102 0 (Disabled)