GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide - Manual (Page 10)

A Series ® Lighting Controller Programmer
Chapter 3 – Menu Structure
6
Event Menu
These menu items are used to acknowledge alarms, view
battery status, view or reset the CE Log, and set up the CE
Log. The CE log captures the events listed in Table 1.
Event Display
Alarm ALARM
Alarm Acknowledged ALARM ACK
Dead Battery DEAD BATT
Dead Battery Restored DEAD BATT RESTORED
Command Failure CMD FAIL
Command Fail Restored CMD FAIL RESTORED
Status ON STATUS ON
Status OFF STATUS OFF
Under Voltage UNDER VOLT
Under Voltage Restored UNDER VOLT RESTORED
Reset DEV RESET
Time / Date change TIME CHG
DB Load DB LOAD
DB Save DB SAVE
DB Clear DB CLEAR
Lnk Online DEV ONLINE
Lnk Offline DEV OFFLINE
Breaker Trip BREAKER TRIP
Breaker Trip Restored BREAKER TRIP RESTORED
No events occurred NONE
Table 1. Events captured in the CE Log.