Viewing breaker burn hours, Editing the breaker burn hours, Resetting breaker burn hours – GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide User Manual
Page 41: A series
A Series
®
Lighting Controller LCD Programmer
Chapter 10 – Burn Hours Menu
37
The Burn Hours menu is used to view and set the
number of hours a breaker is ON.
Viewing Breaker Burn Hours
1.
Navigate to the Burn Hours menu:
2.
Press
OK
to advance to the Breaker Burn Hours
submenu:
3.
Press
OK
and then use the arrow keys to view the
burn hours of the different breakers.
Editing the Breaker Burn Hours
1.
Navigate to the Burn Hours menu:
2.
Press
OK
to advance to the Breaker Burn Hours
submenu:
3.
Use the arrow keys to scroll to the desired breaker
burn hours and press
OK
:
4.
Pres the
A/M
key to change to manual mode. Use
the number and arrow keys to change the setting:
5.
Press
ESC
twice to return to the Burn Hours menu.
Resetting Breaker Burn Hours
1.
Navigate to the Burn Hours menu:
2.
Press
OK
and use the arrow keys to advance to the
Reset Burn Hours submenu:
3.
Press
OK
to reset a particular breaker:
4.
Use the arrow keys to scroll to the desired breaker,
then press
OK
:
Flashing
Flashing