Reset device, Save to flash, Load from flash – GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide User Manual
Page 49: A series
A Series
®
Lighting Controller LCD Programmer
Chapter 12 – Configuration Menu
45
Reset Device
The Reset Device function is used to reset the
controller.
1.
From the Configuration menu, use the arrow keys
to navigate to the Reset Device submenu.
2.
Press
OK
for the following display:
3.
Press
OK
to activate the reset function. Use the
arrow keys to change Yes to No or No to Yes.
or
4.
Press
OK
to accept the changes and return to the
default display.
5.
You must log in again to access additional menus.
Save to Flash
The Save to Flash menu is used to save the database to
controller Flash memory.
1.
From the Configuration menu, use the arrow keys
to scroll to the Save to Flash menu:
2.
Press
OK
for the following display:
3.
Use the arrows keys to select Yes or No:
4.
Do either of the following:
• Select YES and press
OK
. The following display
appears until the function is complete:
• Select No and the previous menu is displayed.
5.
When the Save is complete, the LCD screen
returns to the Save Flash menu.
6.
Press
ESC
to return to the Configuration menu.
Load from Flash
The Load from Flash menu is used to load the saved
database to the controller from flash memory.
1.
From the Configuration menu, use the arrow keys
to scroll to the Load Flash menu:
2.
Press
OK
for the following display:
3.
Use the arrow keys to select Yes or No.
4.
Do either of the following:
• Select YES:
Flashing
Flashing
Flashing
Flashing