GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide - Manual (Page 22)

A Series ® Lighting Controller Programmer
Chapter 7 – I/O Menu
18
switch can be configured in the maintained (tristate)
or momentary configuration. If the expansion board is
not connected to the system, a
symbol appears on
the display to indicate that the input is not physically
present in the system.
Editing Multistate Inputs
Use the following procedure to edit a multistate input:
1. Navigate to the Lighting Switches menu and press
OK .
2. Use the arrow keys to scroll to the desired MI and
then press
OK to edit.
Do one of the following:
• Press the A/M key to change the switch to
manual mode; continue with step 3.
• Press the Fn key to access the special functions;
jump to step 7.
3. If the A/M key is pressed, MAN and the value flash
on the display:
4. Use the arrow keys to adjust the value to OFF/ON
or N/A. (Note that, in manual mode, the items
displayed depend on the type of switch. If the
switch is the toggle type, it will display only ON
and OFF. If the switch is the maintained type, it
will indicate OFF, ON and N/A.) Press
OK to
accept the changes.
5. Press OK again, followed by the A/M key to return
to auto mode.
6. Press O K to accept the change; auto mode the
switch is indicated. Go to step 12.
7. If the Fn key is pressed, COMMISSIONED with NO
or YES flashing displays on the LCD screen. When
an object is not commissioned, then no events or
alarms are logged. When an object is
commissioned, events and alarms are logged as
selected.
or
8. Press the arrow keys to adjust the Commissioned
status to YES or NO. If the switch is not
commissioned, the
symbol appears on the
display.
9. Press OK to accept the changes. The following
screen appears:
This option (MIC) configures the switch as a
multistate maintained switch. Do either of the
following:
• Press OK to accept the switch as a multistate
maintained switch.
• Press up the arrow key twice to move to the
next option:
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing