A series – GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide User Manual
Page 37
A Series
®
Lighting Controller LCD Programmer
Chapter 8 – Lighting Group Menu
33
5.
Continue to scroll through the groups and make
any adjustments, or press
ESC
to return to the
Groups submenu.
Adding a New Group
Use the following procedure to add a new lighting
group:
1.
Navigate to the Groups submenu as in the previous
two procedures:
2.
Press
OK
to display the Group Off Time:
3.
Use the arrow keys to scroll through all the nested
groups. After the last group, Add New Group is
displayed. (This appears immediately if there are
no groups present.)
4.
Do either of the following:
• Press
OK
to edit the LG instance number:
Use the arrow keys to select a different LG:
• Press the
FN
key to edit the panel number for a
remote LG.
Use the numeric arrow keys to change the
panel number and press
OK
key:
5.
Use the arrow keys to change the instance number
and press
OK
to accept the changes.
6.
Do either of the following:
• Press the down arrow to add another New
Group.
• Press
ESC
to return to the Groups submenu.
Flashing
Flashing
Flashing