A series – GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide User Manual
Page 35
A Series
®
Lighting Controller LCD Programmer
Chapter 8 – Lighting Group Menu
31
remote object reference should be made) and
press
OK
to accept the changes.
6.
Press
OK.
Use the arrow keys to edit the object
number and press OK to accept the changes.
7.
The Override time is displayed. Press
OK
to edit
the override time.
8.
Use the arrow keys to change the value and press
OK
to accept the change.
9.
Press
ESC
to return to the Override submenu.
Editing an Override Input
Use the following procedure to edit an Override input:
1.
Navigate to the desired lighting group and press
OK
.
2.
Press the
Fn
key and use the arrow keys to navigate
to the Override menu:
3.
Press
OK
to display the Override:
4.
Press
OK
to edit the override input:
5.
Use the arrow keys to change the override input
type:
or
6.
Press the
Fn
key to edit the panel number:
7.
Use the numeric keys to change the panel number
and press
OK
. The input type flashes again:
8.
Press
OK
to edit the Instance number:
9.
Use the arrow numeric keys to change the instance
number and press
OK
to display the Override time:
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing