Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 20)

017-237-B0 Rev A 18
5.3.2 Mounting to a Wooden Pole
Tools and Materials Required:
• 13 mm nut driver for the bolts that attach the cabinet to the mounting bracket.
• Two 5/8" diameter machine bolts, UNC tread), SAE Grade 5 or better, length to suit the pole, which is not
provided.
• Two 5/8" diameter zinc-plated flat washers.
• Two 5/8" diameter hex nuts UNC thread.
• Auger or drill for boring 3/4" diameter holes in the wood pole.
Procedure
1. Using the mounting bracket as a template, drill 2 holes into the pole to accept the machine bolts.
2. Secure the mounting bracket to the pole with the machine bolts as shown in Figure 10.
3. Secure the Alpha Micro cabinet to the mounting bracket with the supplied bolts. See Figure 11.
Figure 10 — Mounting to a wooden pole
Front Side
Wood
Pole
a. Hook the top of the mounting bracket
under the case’s attachment fitting.
b. Secure the cabinet to the mounting bracket.
Figure 11 — Securing the enclosure to the mounting bracket