Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 64)

017-237-B0 Rev A 62
Password
Is used to set the Alpha Micro’s password. The factory set password is 1111.
Figure 43 — UPS Maintenance: Password screen
The password is limited to 4 alphanumeric characters. The software will not accept more than 4 characters.
Figure 44 — UPS Maintenance: User Input screen
Any user input can be configured to perform a certain action in response to different trigger types and logic lev-
els. For example, if you want the Alpha Micro to issue an intrusion alarm when the door is opened, you will need
to wire the door with a switch that triggers a user input every time the door is opened. The following procedure
describes how User Input 1 can be configured as an intrusion alarm input.
User Input
Three programmable User Inputs exist. Their functions are similar to the Dry Contact relays. Supported functions
include: (a) Shutdown, (b) User Alarm and (c) Self Test.