Alpha Technologies Micro, Micro XL, Micro XL3 UPS - Manual (Page 21)

19 017-237-B0 Rev A
5.3.3 Mounting to a Steel or Concrete Pole
Tools and Materials Required:
• 13 mm nut driver for the bolts that attach the cabinet to the mounting bracket.
• Two pole mount straps that fit the pole. Straps must be stainless or galvanized.
• C001 Band-It tool or equivalent.
• C206 3/4 inch stainless steel Band-It band or equivalent.
• C256 3/4 inch stainless steel Band-It buckles or equivalent.
Procedure
1. Secure the mounting bracket to the pole with the straps.
Steel or Concrete
Pole
2. Secure the Alpha Micro cabinet to the mounting bracket with the supplied bolts.
b. Secure the cabinet to the mounting bracket.
a. Hook the top of the mounting bracket
under the case’s attachment fitting.
Figure 12 — Mounting to a steel or concrete pole
Figure 13 — Securing the Alpha Micro enclosure to the mounting bracket