Alpha Technologies DSM3 for XM2 - Technical Manual - Manual (Page 13)

13 745-814-B8-001, Rev. C (03/2014)
3.0 Network Configuration
3.1 Provisioning the DHCP Server with the MAC addresses
On the DHCP server, assign the cable modem’s RF MAC address with a DOCSIS Configuration File
to set modem communication options. (See Section 3.3 for instructions on how to create a DOCSIS
Configuration File).
Fig. 3-1, Locations of MAC Address labels
The RF and CPE MAC addresses are located in two places on the DSM3 Series and on the packing slip,
see below.
Identifier label
Cable Modem
and CPE MAC
address label