Alpha Technologies DSM3 for XM2 - Technical Manual - Manual (Page 31)

31 745-814-B8-001, Rev. C (03/2014)
4.8 Setting the I/O Controller via the Web Page
Access the I/O Environment page in the Advanced Configuration menu to adjust the settings for the
Tamper Switch and I/O Controller (DSM3X and DPM only). The Tamper Switch polarity may be changed
by clicking on the preferred tamper switch polarity button. The I/O Controller section provides a user
interface to select the type of device that will be connected and monitored via the ENV connector of the
Communications Module. An example of such a device would be a battery heater mat controller.
Fig. 4-14, Advanced I/O Controller Status Screen
(data values shown for illustration purposes only)
4.0 Web Interface, continued