Alpha Technologies DSM3 for XM2 - Technical Manual - Manual (Page 52)

52 745-814-B8-001, Rev. C (03/2014)
6.0 Data Management
Accompanying the release of the DSM3 Series are 22 new MIB files. These are backward-compatible
with the existing Alpha Technologies DSM series Communications Modules. These MIBs are available by
contacting Alpha Technical Support or from the Alpha website. A complete listing is shown below:
ATI-BB-SYS-APPS-MIB.my
ATI-BB-SYS-LOGS-MIB.my
ATI-BB-SYS-VIEW-MIB.my
ATI-MANAGEMENT-MIB.my
ATI-MGMT-SNMP-MIB.my
ATI-MGMT-SYS-ACCESS-MIB.my
ATI-MGMT-SYS-DOWNLOAD-MIB.my
ATI-MGMT-SYS-GENRL-CTRL-MIB.my
ATI-MGMT-SYS-GENRL-INFO-MIB.my
ATI-MGMT-SYS-LAP-MIB.my
ATI-MGMT-SYS-MIB.my
ATI-MGMT-SYS-NV-DEFAULTS.my
ATI-MGMT-SYS-PHONEHOME-MIB.my
ATI-MGMT-SYS-SERVERS-MIB.my
ATI-MGMT-SYS-TEMP-MGR-MIB.my
ATI-MPSPS-MIB.my
ATI-PKT-CABLE-UPS-MIB.my
ATI-PRODUCT-PLATFORMS-MIB.my
ATI-ROOT-MIB.my
ATI-TABLES-MGMT-MIB.my
ATI-TABLES-MIB.my
ATL-ROOT-MIB.my
MIB browsers such as MG-Soft (www.mg-soft.com) require these MIBs to be compiled into the browser
for the branches and parameters to be ordered and displayed properly. Refer to your MIB browser’s
documentation for instructions on compiling MIB files.
The following MIB files may be required (see http://www.simpleWeb.org) to be compiled into the MIB
browser prior to the Alpha MIB files:
RFC-1212
RFC-1215
RFC1155-SMI
SNMPv2-MIB
SNMPv2-TC
Additionally, there are four MIBs from Broadcom that are necessary to support the new features of the
DSM3 Series. They are:
BRCM-CABLEDATA-MGMT.my
BRCM-CABLEDATA-SMI.my
BRCM-HTTP-MGMT.my
BRCM-TELNET-MGMT.my
6.3 The Alpha MIBs