Alpha Technologies DSM3 for XM2 - Technical Manual - Manual (Page 30)

30 745-814-B8-001, Rev. C (03/2014)
4.7 Viewing HMS Alarm Status via the Web Page
HMS alarms levels and current states may be viewed by clicking on the HMS Alarms link on the
Advanced Configuration menu (see Figure 4-13). Parameter values cannot be edited on this Web page.
An SNMP MIB browser or status monitoring software may be used for such edits.
Alarms settings may be exported by selecting the
Export button at the bottom of the page. Alarms
settings may be distributed to other DSM3 Series units. For more details, refer to the DSM3 Alarm
Cloning and Distribution section under Section 6.2.1, SCTE-HMS Configurable Alarms.
Fig. 4-13, HMS Alarm Configuration
(data values shown for illustration purposes only)
4.0 Web Interface, continued
Refer to Table 6-3 Recommended Settings for DSM3 Series Analog Alarms for information regarding the scaling applied to the
indicated values.