Alpha Technologies DSM3 for XM2 - Technical Manual - Manual (Page 90)

90 745-814-B8-001, Rev. C (03/2014)
13.0 Dual IP Mode (Addendum), continued
13.3 Configuring Dual IP Mode, continued
To change the IP address allocation option from “DHCP” to “Static” via the Web Server, refer to the
following:
1. Connect to DSM via Web browser per the procedure in section 4.0.
2. Move mouse pointer to the “Advanced Settings” in the menu bar of the DSM3 Web page and click
on the “Communications” selection in the pop-up menu.
3. Select the “Static” option in the CPE Communications Module column of the page. Refer to Fig. 13-5.
When prompted for user ID and password, enter "Alpha" and "AlphaSet".
4. Enter the desired IP address, Subnet Mask and Gateway in the provided data fields.
5. Click the “Set” button to update the Communications Module with the new values.
6. Confirm the new Static IP Address is listed under the CPE Communications Module column of the
“General” page. Refer to Fig. 13.6.
Fig. 13-5, Dual IP Configuration Settings on Communications page of DSM3 Web Server
Fig. 13-6, Dual IP Parameters on the General page of DSM3 Web Server