1 web interface security levels, 0 web interface, continued, 3 navigating the web page, continued – Alpha Technologies DSM3 for XM2 - Technical Manual User Manual
Page 27
27
745-814-B8-001, Rev. C (03/2014)
4.0 Web Interface, continued
4.3 Navigating the Web Page, continued
4.3.1 Web Interface Security Levels
The DSM3 Series Communications Module has two levels of function-specific security. General
operations are Level 1. Configuration-related functions are Level 2. Refer to Figure 4-8 for default
User Name and Security Passwords.
Table 4-1, DSM3 Series Communications Module Security Levels
DSM3 Series Web Page Security
OID
Function
Value
1.3.6.1.4.1.4413.2.2.2.1.1.3.3.0
Level 1 User Name
Alpha
1.3.6.1.4.1.4413.2.2.2.1.1.3.4.0
Level 1 Security Password
AlphaGet
1.3.6.1.4.1.4413.2.2.2.1.1.3.1.0
Level 2 User Name
Alpha
1.3.6.1.4.1.4413.2.2.2.1.1.3.2.0
Level 2 Security Password
AlphaSet
Web Page
Function
Security Level
General
System Name, System Contact, System Location,
Common Logical ID
1
Power Supply Self Test
1
Generator Self Test
1
Advanced Communications
Reset Communications Module
1
Provisioning Mode - Single IP or Dual IP
2
Configure Static IP Address
2
Configure Proprietary Trap Addresses
2
Advanced Power Supply
Power Supply Self Test
1
Advanced Generator
Generator Self Test
1
Reset Latched Alarms
1
Modem Log [Event Log]
Reset Log
1
Advanced I/O
Tamper Switch Polarity
1
Enclosure Heater/Cooler Installed
1
HMS Alarms
Export Alarm Cloning File
2