Burkert Type 1150 - Manual (Page 12)

10 - 1150
S
YSTEM DESCRIPTION
Function description
Block structure
Type 1150 is a process and program controller with up to four controller or program channels. The
instrument is built to the format 144 mm x 130 mm for a standard 92 mm x 92 mm panel cut-out and a
mounting depth of 170 mm.
The display is a 5" color screen with 27 colors. The layout of the screen templates can be individually
adapted and adjusted. Two freely configurable screen templates make it possible to customize the placing
of texts, process values, background pictures and icons.
A maximum of 4 analog inputs and 6 logic inputs are available, as well as six expansion slots for switched
or analog outputs.
A setup program is available for direct configuration via a PC. Linearizations for the usual transmitter
outputs are stored within the instrument, four customer-specific linearization tables can be programmed.
A math and logic module can be used to adapt the instrument to a very wide range of control tasks.
A serial interface RS422/485 or Profibus-DP can be used to integrate the instrument into a data network.
Modules can be retrofitted quite simply by the user.
The electrical connection is made at the back of the instrument, via plug-in screw terminals.