Burkert Type 1150 - Manual (Page 62)

60 - 1150
C
ONFIGURATION
Generator
The basic function of the instrument is defined here. The instrument with all the
available controller channels can be operated as a fixed setpoint controller, program
controller or program generator.
Furthermore, ramp functions (fixed-setpoint controller) can be activated for the indivi-
dual controller channels with different parameters defined for the program controller/
generator.
Configuration
Analog inputs
Controller
Generator
Limit comparators
Outputs
Logic functions
Math / logic
C-level
Display
Interfaces
Device data
Recording
Function / ...
Value / selection Description
Function
Fixed-setpt.contr.
Progr.contr.
Progr.gen. Basic instrument function
Ramp function
A rising or a falling ramp function can be implemented. The ramp-end value is determined by the setpoint
input.
The ramp function can be stopped and canceled via the logic functions (see Chapter “Logic functions”).
The ramp function is interrupted on a probe break, or for manual mode. The outputs react the
same as for overrange/underrange (user configurable). NOTE