Collective picture / controller 1(2 to 4), Decimal point – Burkert Type 1150 User Manual
Page 82
Advertising
80 - 1150
C
ONFIGURATION
Value / selection
Description
Value column 1
Display:
(Analog selector)
Ramp end C1
Decimal point column 1
XXX.X
Value column 2
(Analog selector)
Setpoint C1
Decimal point column 2
XXX.X
Value column 3
(Analog selector)
Output C1
Decimal point column 3
XXXX
Collective picture / Controller 1(2 to 4) / ...
If the value that is to be displayed can no longer be represented with the user-programmed decimal point,
then the number of decimal places will be automatically reduced. If, subsequently, the measured value
decreases, the number of decimal places increases to the preprogrammed value of the decimal point.
Decimal point
Controller 4
Controller 1
Controller 2
Controller 3
Column 1
Column 2 Column 3
Advertising