Burkert Type 1150 User Manual
Page 89
Advertising
1150 - 87
O
PTIMIZATION
Start of self-optimization after power-on and during the start-up phase
NOTE
With output type “solid-state”, the cycle time during optimization is reduced to 8 x the
sampling time.
With the “relay” output type, care has to be taken that the process value is not influenced by
the switching cycle time, otherwise optimization cannot be completed successfully.
Solution: Reduce the cycle time Cy, until the process value is no longer influenced. (Manual
mode can be used for the adjustment!)
Start of self-optimization during operation
Advertising