Ramp / ramp controller 1 (2 to 4), Program – Burkert Type 1150 User Manual
Page 63
1150 - 61
C
ONFIGURATION
Ramp / Ramp controller 1 (2 to 4)
Value / selection
Description
Function
F
Inactiv
Activ
Defines whether the ramp function is to be activated for the corresponding
controller channel.
Unit of slope
F
K / minute
K / hour
K / day
Defines the unit of the slope in kelvin per unit of time.
Ramp slope
F
0 to 9999
Amount of slope
Program / ...
F
= Parameter only available for fixed-setpoint controller.
P
= Parameter only available for program controller / generator.
NOTE
Value / selection
Description
Program start
P
Program start
At process value
Program start at the first programm ed setpoint.
The present process value from program channel 1 is accepted as the first
setpoint.
Response for range
P
Continue
Program stop
Response of the program run to out-of-range.