Burkert Type 1150 - Manual (Page 80)

78 - 1150
C
ONFIGURATION
Display
The time-dependent screen saving is defined here. In addition, time-out and the
sequence of the different screen templates can be defined. The representations on
the controller pictures 1 - 4 and on the collective picture can be adapted to suit indi-
vidual requirements. Configuration
Analog inputs
Controller
Generator
Limit comparators
Outputs
Logic functions
Math / logic
C-level
Display
Interfaces
Device data
Recording
Value / selection Description
Contrast
0 to 22 to 31 Contrast of color screen
Continous operation from
hh:mm:ss
06:30:00 Switch-on time for screen
Continous operation until
hh:mm:ss
22:00:00 Switch-off time for screen
Screen saving
0 to 9999 min. If no key is pressed for a specified time, the screen switches off. The screen
comes on automatically when a key is pressed.
The function is not active with continous operation.
0 = no function
Time-Out
0 to 60 to 9999 sec The instrument automatically returns to the display of the screen operating loop if
no key is pressed for a specified time.
0 = no time-out
Automatic channel changeover
0 to 9999 sec The screen templates of the operating loop are automatically switched over after
a selectable time.
0 = switched off
Display after a reset
Last picture
Controller pic. 1
Controller pic. 2
Controller pic. 3
Controller pic. 4
Collective pic.
Recording
Custom pic. 1
Custom pic. 2
Last picture before power-off is shown
Controller channel 1
Controller channel 2
Controller channel 3
Controller channel 4
All channels as a group picture
Recording (extra code)
Freely configurable screen template 1
Freely configurable screen template 2